Available with two prime mover options, the ‘7 Series’ generator sets create high standards of excellence in both technology and performance.
Scania have earned a worldwide reputation for high quality, reliable and environmentally friendly engines in the premium heavy-duty automotive market. These benefits are now available in the new 7 series diesel generating sets with the all-new DC12 and DC16 engines, which encompass electronically controlled unit injectors.
The Sweden-manufactured engines offer premium features, normally associated with larger engines, and ensure generating sets of high performance.
The alternative prime mover is provided by the new Perkins 2800 Series engine in the range 600 to 710kVA.
The new Perkins engine generating sets offers optimised emissions and fuel optimised formats that will enhance and close existing product gaps in the 7S Scania powered range.
Complete 'ready-to-run' specification with features as follows: Electronic engine speed governor, engine lubrication oil, engine sump drain piping and valve, 3-phase alternator, radiator with 50 degC ambient capability, radiator coolant drain piping and valve, coolant solution with 30% anti-freeze.
Polyester powder coated baseframe with earth stud, vibration isolators between genset and base, fuel tank (minimum 8 hours) with filler cap, flexible fuel lines, a fuel tank level gauge, fuel /water separator, exhaust manifold stub pipe, exhaust silencer.
Wiring loom /harness, 3-pole circuit breaker, earth strap, battery rack and cables on base frame, heavy duty starting battery /batteries (dry charged), InSight4000 control panel, emergency stop lock-down pushbutton.
Operator's manual pack (English - other languages available at no extra charge).
Standard features include a sophisticated digital electronic genset control panel, fully optionalised, with diagnostic capability. See the separate brochure for InSight4000 features and additional options.
The control panel may be upgraded to InSight5000 for AMF operation and /or for use with an automatic transfer panel.
Sound attenuated enclosures are manufactured from heavy gauge galvanised sheet steel (polyester powder painted for rust-proofed protection). The enclosures are fitted with extra-thick, high-density acoustic grade foam for superior performance. Access is provided by wide aperture lockable doors with corrosion resistant fasteners used throughout. The residential silencer is mounted internally for enhanced performance and heavy-duty lifting eyes are provided on the baseframe. An internally mounted centre lifting beam is available as an optional extra.
If you would like to view the specifications of this series click the pdf below. Spec sheets are between 500kb - 2Mb.
To view a 700 x 500 pixel image, click on the thumbnail image below. Images are between 50 - 250 kb